① The construction materials of rabbit houses, especially the materials of rabbit cages, should be strong and durable to prevent being bitten and damaged by rabbits; Measures should be taken to prevent rabbits from burrowing and escaping on the building.
② The floor of the rabbit house shall be flat, solid and moisture-proof. The floor inside the house shall be 20~25cm higher than the floor outside the house. There shall be slopes on both sides of the walkway inside the house; The interior wall, the inner wall of the cement prefabricated slab rabbit cage, and the fece-bearing surface of the fece-bearing plate shall be flat and smooth, easy to remove dirt, and easy to clean and disinfect.
③ The lighting area of the window of the rabbit house is 15% of the ground area, and the incidence angle of sunlight is not less than 25 °~30 °. The door of the rabbit house shall be strong, insulated and protected from animal damage. The size of the door shall be convenient for the access of the feed truck and the manure truck.
④ A drainage system shall be set in the rabbit house. The drainage ditch should have a certain slope, so that when cleaning and washing with water, the feces and urine can be smoothly discharged out of the house, leading to the septic tank, and the urine can be discharged out of the house at any time, so as to reduce the humidity and harmful gas concentration in the house.
⑤ In order to prevent epidemic and disinfect, disinfection pools or trays should be set at the entrance of rabbit farms and rabbit houses, and it should be convenient to replace the disinfectant.
⑥ Ventilation in the rabbit house. Natural ventilation is often used in hot areas in southern China. Natural ventilation is suitable for small-scale rabbit farms. Mechanical ventilation is suitable for large rabbit farms with high intensity.
In addition, rabbit farms with a certain scale should be divided into four areas: production area, management area, living area and auxiliary area.
The production area is the core part of the rabbit farm. Its direction is generally south to north. The production area should be arranged side by side with the living area and be downwind. The production area shall be arranged in the order of the core group breeding rabbit house - breeding rabbit house - breeding rabbit house - young rabbit house, and the crossing of the material transportation route and the dung transportation route shall be avoided as far as possible.
The management area should be close to the gate to facilitate external communication and reduce direct interference to the production area.
The living area is parallel to the production area and close to the management area, but it must be upwind of the production area. The building area of auxiliary facilities is divided into two zones. The first zone includes feed warehouse, feed processing workshop, hay warehouse, water and electricity room, etc; The first area includes the veterinary diagnosis room, the isolation room for sick rabbits, and the dead rabbit necropsy pool.
Due to the dust pollution in feed processing, the veterinary diagnosis room and the isolation room of sick rabbits are often exposed to pathogens. Therefore, the auxiliary area must be located in the downwind of the production area, the management area and the living area. As for the specific layout of each area, it should be reasonably arranged in accordance with the principle of facilitating production and epidemic prevention, convenient work and management. Come to our website for more relevant content http://www.hempdirector.com consulting service